This heavy-duty seamless, trowel-applied resurfacer
incorporates epoxy resins and specially graded
aggregates. It is ideal for repair of slight to
badly spalled or eroded substrates.
This system is
also used for producing a heavy traffic chemical
resistant floor surface on new concrete floors.
Epoxy mortar is usually applied at a minimum of 3/16" to
whatever thickness necessary to correct floor
Epoxy mortar produces a 17,000 P.S.I. high strength and
impact resistant floor.
High impact and wear resistant - will be stronger than
2 to 3 times the strength of concrete.
Urethane and Epoxy finish coats provide specific
performance characteristics as needed.
Textures - Smooth and 5 standard levels of
slip-resistant aluminum oxide grit.
Hand or power trowel applied.
Avoid costly product damage due to cracked, spalled
or rough concrete floors.
Will not support growth of fungus or bacteria, when
USDA-accepted and no solvent odors.
Thermal Shock Resistant
When grouted and sealed, Epoxy mortar eliminates
porosity and produces a dense, skid-inhibiting
finish that will minimize dirt and chemical
Designed to be an Industrial Floor System.
Resists changes in temperature, abrasion, and harsh
Epoxy Resurfacers are capable or withstanding heavy
duty traffic while improving safety.
Can be used to form an integral cove base where
For a truly impressive, long-lasting economical
alternative to replacing badly eroded and spalled
Restore worn, pitted or deteriorated concrete to a
smooth, highly dense surface with 100% solids epoxy
Back to top
download this page in a PDF format